🚀 UniDep - Unified Conda and Pip Dependency Management 🚀

UniDep streamlines Python project dependency management by unifying Conda and Pip packages in a single system. Learn when to use UniDep in our FAQ.

Handling dependencies in Python projects can be challenging, especially when juggling Python and non-Python packages. This often leads to confusion and inefficiency, as developers juggle between multiple dependency files.

📝 Unified Dependency File: Use either requirements.yaml or pyproject.toml to manage both Conda and Pip dependencies in one place.
⚙️ Build System Integration: Integrates with Setuptools and Hatchling for automatic dependency handling during pip install ./your-package.
💻 One-Command Installation: unidep install handles Conda, Pip, and local dependencies effortlessly.
🏢 Monorepo-Friendly: Render (multiple) requirements.yaml or pyproject.toml files into one Conda environment.yaml file and maintain fully consistent global and per sub package conda-lock files.
🌍 Platform-Specific Support: Specify dependencies for different operating systems or architectures.
🔧 pip-compile Integration: Generate fully pinned requirements.txt files from requirements.yaml or pyproject.toml files using pip-compile.
🔒 Integration with conda-lock: Generate fully pinned conda-lock.yml files from (multiple) requirements.yaml or pyproject.toml file(s), leveraging conda-lock.
🤓 Nerd stats: written in Python, >99% test coverage, fully-typed, all Ruff's rules enabled, easily extensible, and minimal dependencies

unidep is designed to make dependency management in Python projects as simple and efficient as possible. Try it now and streamline your development process!

Tip

Check out the example requirements.yaml and pyproject.toml below.

📚 Table of Contents

📦 Installation
📝 requirements.yaml and pyproject.toml structure
🧩 Build System Integration
🖥️ As a CLI
❓ FAQ
🛠️ Troubleshooting
- pip install fails with FileNotFoundError
⚠️ Limitations

📦 Installation

To install unidep, run one of the following commands that use pipx (recommended), pip, or conda:

pipx install "unidep[all]"  # Recommended (install as a standalone CLI)

or

pip install "unidep[all]"

or

conda install -c conda-forge unidep

📝 `requirements.yaml` and `pyproject.toml` structure

unidep allows either using a

requirements.yaml file with a specific format (similar but not the same as a Conda environment.yaml file) or
pyproject.toml file with a [tool.unidep] section.

Both files contain the following keys:

name (Optional): For documentation, not used in the output.
channels: List of conda channels for packages, such as conda-forge.
dependencies: Mix of Conda and Pip packages.
local_dependencies (Optional): List of paths to other requirements.yaml or pyproject.toml files to include.
optional_dependencies (Optional): Dictionary with lists of optional dependencies.
platforms (Optional): List of platforms that are supported (used in conda-lock).

Whether you use a requirements.yaml or pyproject.toml file, the same information can be specified in either. Choose the format that works best for your project.

Example

Example `requirements.yaml`

Example of a requirements.yaml file:

name: example_environment
channels:
  - conda-forge
dependencies:
  - numpy                   # same name on conda and pip
  - conda: python-graphviz  # When names differ between Conda and Pip
    pip: graphviz
  - pip: slurm-usage >=1.1.0,<2  # pip-only
  - conda: mumps                 # conda-only
  # Use platform selectors
  - conda: cuda-toolkit =11.8    # [linux64]
local_dependencies:
  - ../other-project-using-unidep     # include other projects that use unidep
  - ../common-requirements.yaml       # include other requirements.yaml files
  - ../project-not-managed-by-unidep  # 🚨 Skips its dependencies!
optional_dependencies:
  test:
    - pytest
  full:
    - ../other-local-dep[test]  # include its optional 'test' dependencies
platforms:  # (Optional) specify platforms that are supported (used in conda-lock)
  - linux-64
  - osx-arm64

Important

unidep can process this during pip install and create a Conda installable environment.yaml or conda-lock.yml file, and more!

Note

For a more in-depth example containing multiple installable projects, see the example directory.

Example `pyproject.toml`

Alternatively, one can fully configure the dependencies in the pyproject.toml file in the [tool.unidep] section:

[tool.unidep]
channels = ["conda-forge"]
dependencies = [
    "numpy",                                         # same name on conda and pip
    { conda = "python-graphviz", pip = "graphviz" }, # When names differ between Conda and Pip
    { pip = "slurm-usage >=1.1.0,<2" },              # pip-only
    { conda = "mumps" },                             # conda-only
    { conda = "cuda-toolkit =11.8:linux64" }         # Use platform selectors by appending `:linux64`
]
local_dependencies = [
    "../other-project-using-unidep",   # include other projects that use unidep
    "../common-requirements.yaml"      # include other requirements.yaml files
    "../project-not-managed-by-unidep" # 🚨 Skips its dependencies!
]
optional_dependencies = {
    test = ["pytest"],
    full = ["../other-local-dep[test]"]  # include its optional 'test' dependencies
}
platforms = [ # (Optional) specify platforms that are supported (used in conda-lock)
    "linux-64",
    "osx-arm64"
]

This data structure is identical to the requirements.yaml format, with the exception of the name field and the platform selectors. In the requirements.yaml file, one can use e.g., # [linux64], which in the pyproject.toml file is :linux64 at the end of the package name.

See Build System Integration for more information on how to set up unidep with different build systems (Setuptools or Hatchling).

Important

In these docs, we often mention the requirements.yaml format for simplicity, but the same information can be specified in pyproject.toml as well. Everything that is possible in requirements.yaml is also possible in pyproject.toml!

Key Points

Standard names (e.g., - numpy) are assumed to be the same for Conda and Pip.
Use a dictionary with conda: <package> and pip: <package> to specify different names across platforms.
Use pip: to specify packages that are only available through Pip.
Use conda: to specify packages that are only available through Conda.
Use # [selector] (YAML only) or package:selector to specify platform-specific dependencies.
Use local_dependencies: to include other requirements.yaml or pyproject.toml files and merge them into one. Also allows projects that are not managed by unidep to be included, but be aware that this skips their dependencies!
Use optional_dependencies: to specify optional dependencies. Can be installed like unidep install ".[test]" or pip install ".[test]".
Use platforms: to specify the platforms that are supported. If omitted, all platforms are assumed to be supported.

We use the YAML notation here, but the same information can be specified in pyproject.toml as well.

Supported Version Pinnings

UniDep supports a range of version pinning operators (the same as Conda):

Standard Version Constraints: Specify exact versions or ranges with standard operators like =, >, <, >=, <=.
- Example: =1.0.0, >1.0.0, <2.0.0.
Version Exclusions: Exclude specific versions using !=.
- Example: !=1.5.0.
Redundant Pinning Resolution: Automatically resolves redundant version specifications.
- Example: >1.0.0, >0.5.0 simplifies to >1.0.0.
Contradictory Version Detection: Errors are raised for contradictory pinnings to maintain dependency integrity. See the Conflict Resolution section for more information.
- Example: Specifying >2.0.0, <1.5.0 triggers a VersionConflictError.
Invalid Pinning Detection: Detects and raises errors for unrecognized or improperly formatted version specifications.
Conda Build Pinning: UniDep also supports Conda's build pinning, allowing you to specify builds in your pinning patterns.
- Example: Conda supports pinning builds like qsimcirq * cuda* or vtk * *egl*.
- Limitation: While UniDep allows such build pinning, it requires that there be a single pin per package. UniDep cannot resolve conflicts where multiple build pinnings are specified for the same package.
  - Example: UniDep can handle qsimcirq * cuda*, but it cannot resolve a scenario with both qsimcirq * cuda* and qsimcirq * cpu*.
Other Special Cases: In addition to Conda build pins, UniDep supports all special pinning formats, such as VCS (Version Control System) URLs or local file paths. This includes formats like package @ git+https://git/repo/here or package @ file:///path/to/package. However, UniDep has a limitation: it can handle only one special pin per package. These special pins can be combined with an unpinned version specification, but not with multiple special pin formats for the same package.
- Example: UniDep can manage dependencies specified as package @ git+https://git/repo/here and package in the same requirements.yaml. However, it cannot resolve scenarios where both package @ git+https://git/repo/here and package @ file:///path/to/package are specified for the same package.

Warning

Pinning Validation and Combination: UniDep actively validates and/or combines pinnings only when multiple different pinnings are specified for the same package. This means if your requirements.yaml files include multiple pinnings for a single package, UniDep will attempt to resolve them into a single, coherent specification. However, if the pinnings are contradictory or incompatible, UniDep will raise an error to alert you of the conflict.

Conflict Resolution

unidep features a conflict resolution mechanism to manage version conflicts and platform-specific dependencies in requirements.yaml or pyproject.toml files.

How It Works

Version Pinning Priority: unidep gives priority to version-pinned packages when the same package is specified multiple times. For instance, if both foo and foo <1 are listed, foo <1 is selected due to its specific version pin.
Platform-Specific Version Pinning: unidep resolves platform-specific dependency conflicts by preferring the version with the narrowest platform scope. For instance, given foo <3 # [linux64] and foo >1, it installs foo >1,<3 exclusively on Linux-64 and foo >1 on all other platforms.
Intractable Conflicts: When conflicts are irreconcilable (e.g., foo >1 vs. foo <1), unidep raises an exception.

Platform Selectors

This tool supports a range of platform selectors that allow for specific handling of dependencies based on the user's operating system and architecture. This feature is particularly useful for managing conditional dependencies in diverse environments.

Supported Selectors

The following selectors are supported:

linux: For all Linux-based systems.
linux64: Specifically for 64-bit Linux systems.
aarch64: For Linux systems on ARM64 architectures.
ppc64le: For Linux on PowerPC 64-bit Little Endian architectures.
osx: For all macOS systems.
osx64: Specifically for 64-bit macOS systems.
arm64: For macOS systems on ARM64 architectures (Apple Silicon).
macos: An alternative to osx for macOS systems.
unix: A general selector for all UNIX-like systems (includes Linux and macOS).
win: For all Windows systems.
win64: Specifically for 64-bit Windows systems.

Usage

Selectors are used in requirements.yaml files to conditionally include dependencies based on the platform:

dependencies:
  - some-package >=1  # [unix]
  - another-package   # [win]
  - special-package   # [osx64]
  - pip: cirq         # [macos win]
    conda: cirq       # [linux]

Or when using pyproject.toml instead of requirements.yaml:

[tool.unidep]
dependencies = [
    "some-package >=1:unix",
    "another-package:win",
    "special-package:osx64",
    { pip = "cirq:macos win", conda = "cirq:linux" },
]

In this example:

some-package is included only in UNIX-like environments (Linux and macOS).
another-package is specific to Windows.
special-package is included only for 64-bit macOS systems.
cirq is managed by pip on macOS and Windows, and by conda on Linux. This demonstrates how you can specify different package managers for the same package based on the platform.

Note that the package-name:unix syntax can also be used in the requirements.yaml file, but the package-name # [unix] syntax is not supported in pyproject.toml.

Implementation

unidep parses these selectors and filters dependencies according to the platform where it's being installed. It is also used for creating environment and lock files that are portable across different platforms, ensuring that each environment has the appropriate dependencies installed.

🧩 Build System Integration

Tip

See example/ for working examples of using unidep with different build systems.

unidep seamlessly integrates with popular Python build systems to simplify dependency management in your projects.

Example packages

Explore these installable example packages to understand how unidep integrates with different build tools and configurations:

Project	Build Tool	`pyproject.toml`	`requirements.yaml`	`setup.py`
`setup_py_project`	`setuptools`	✅	✅	✅
`setuptools_project`	`setuptools`	✅	✅	❌
`pyproject_toml_project`	`setuptools`	✅	❌	❌
`hatch_project`	`hatch`	✅	✅	❌
`hatch2_project`	`hatch`	✅	❌	❌

Setuptools Integration

For projects using setuptools, configure unidep in pyproject.toml and either specify dependencies in a requirements.yaml file or include them in pyproject.toml too.

Using pyproject.toml only: The [project.dependencies] field in pyproject.toml gets automatically populated from requirements.yaml or from the [tool.unidep] section in pyproject.toml.
Using setup.py: The install_requires field in setup.py automatically reflects dependencies specified in requirements.yaml or pyproject.toml.

Example pyproject.toml Configuration:

[build-system]
build-backend = "setuptools.build_meta"
requires = ["setuptools", "unidep"]

[project]
dynamic = ["dependencies"]

Hatchling Integration

For projects managed with Hatch, unidep can be configured in pyproject.toml to automatically process the dependencies from requirements.yaml or from the [tool.unidep] section in pyproject.toml.

Example Configuration for Hatch:

[build-system]
requires = ["hatchling", "unidep"]
build-backend = "hatchling.build"

[project]
dynamic = ["dependencies"]
# Additional project configurations

[tool.hatch]
# Additional Hatch configurations

[tool.hatch.metadata.hooks.unidep]

🖥️ As a CLI

See example for more information or check the output of unidep -h for the available sub commands:

usage: unidep [-h]
              {merge,install,install-all,conda-lock,pip-compile,pip,conda,version}
              ...

Unified Conda and Pip requirements management.

positional arguments:
  {merge,install,install-all,conda-lock,pip-compile,pip,conda,version}
                        Subcommands
    merge               Combine multiple (or a single) `requirements.yaml` or
                        `pyproject.toml` files into a single Conda installable
                        `environment.yaml` file.
    install             Automatically install all dependencies from one or
                        more `requirements.yaml` or `pyproject.toml` files.
                        This command first installs dependencies with Conda,
                        then with Pip. Finally, it installs local packages
                        (those containing the `requirements.yaml` or
                        `pyproject.toml` files) using `pip install [-e]
                        ./project`.
    install-all         Install dependencies from all `requirements.yaml` or
                        `pyproject.toml` files found in the current directory
                        or specified directory. This command first installs
                        dependencies using Conda, then Pip, and finally the
                        local packages.
    conda-lock          Generate a global `conda-lock.yml` file for a
                        collection of `requirements.yaml` or `pyproject.toml`
                        files. Additionally, create individual `conda-
                        lock.yml` files for each `requirements.yaml` or
                        `pyproject.toml` file consistent with the global lock
                        file.
    pip-compile         Generate a fully pinned `requirements.txt` file from
                        one or more `requirements.yaml` or `pyproject.toml`
                        files using `pip-compile` from `pip-tools`. This
                        command consolidates all pip dependencies defined in
                        the `requirements.yaml` or `pyproject.toml` files and
                        compiles them into a single `requirements.txt` file,
                        taking into account the specific versions and
                        dependencies of each package.
    pip                 Get the pip requirements for the current platform
                        only.
    conda               Get the conda requirements for the current platform
                        only.
    version             Print version information of unidep.

options:
  -h, --help            show this help message and exit

`unidep merge`

Use unidep merge to scan directories for requirements.yaml file(s) and combine them into an environment.yaml file. See unidep merge -h for more information:

usage: unidep merge [-h] [-o OUTPUT] [-n NAME] [--stdout]
                    [--selector {sel,comment}] [-d DIRECTORY] [--depth DEPTH]
                    [-v]
                    [--platform {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}]
                    [--skip-dependency SKIP_DEPENDENCY]
                    [--ignore-pin IGNORE_PIN] [--overwrite-pin OVERWRITE_PIN]

Combine multiple (or a single) `requirements.yaml` or `pyproject.toml` files
into a single Conda installable `environment.yaml` file. Example usage:
`unidep merge --directory . --depth 1 --output environment.yaml` to search for
`requirements.yaml` or `pyproject.toml` files in the current directory and its
subdirectories and create `environment.yaml`. These are the defaults, so you
can also just run `unidep merge`.

options:
  -h, --help            show this help message and exit
  -o OUTPUT, --output OUTPUT
                        Output file for the conda environment, by default
                        `environment.yaml`
  -n NAME, --name NAME  Name of the conda environment, by default `myenv`
  --stdout              Output to stdout instead of a file
  --selector {sel,comment}
                        The selector to use for the environment markers, if
                        `sel` then `- numpy # [linux]` becomes `sel(linux):
                        numpy`, if `comment` then it remains `- numpy #
                        [linux]`, by default `sel`
  -d DIRECTORY, --directory DIRECTORY
                        Base directory to scan for `requirements.yaml` or
                        `pyproject.toml` file(s), by default `.`
  --depth DEPTH         Maximum depth to scan for `requirements.yaml` or
                        `pyproject.toml` files, by default 1
  -v, --verbose         Print verbose output
  --platform {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}, -p {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}
                        The platform(s) to get the requirements for. Multiple
                        platforms can be specified. By default, the current
                        platform (`linux-64`) is used.
  --skip-dependency SKIP_DEPENDENCY
                        Skip installing a specific dependency that is in one
                        of the `requirements.yaml` or `pyproject.toml` files.
                        This option can be used multiple times, each time
                        specifying a different package to skip. For example,
                        use `--skip-dependency pandas` to skip installing
                        pandas.
  --ignore-pin IGNORE_PIN
                        Ignore the version pin for a specific package, e.g.,
                        `--ignore-pin numpy`. This option can be repeated to
                        ignore multiple packages.
  --overwrite-pin OVERWRITE_PIN
                        Overwrite the version pin for a specific package,
                        e.g., `--overwrite-pin 'numpy==1.19.2'`. This option
                        can be repeated to overwrite the pins of multiple
                        packages.

`unidep install`

Use unidep install on one or more requirements.yaml files and install the dependencies on the current platform using conda, then install the remaining dependencies with pip, and finally install the current package with pip install [-e] .. See unidep install -h for more information:

usage: unidep install [-h] [-v] [-e] [--skip-local] [--skip-pip]
                      [--skip-conda] [--skip-dependency SKIP_DEPENDENCY]
                      [--no-dependencies]
                      [--conda-executable {conda,mamba,micromamba}]
                      [--conda-env-name CONDA_ENV_NAME | --conda-env-prefix CONDA_ENV_PREFIX]
                      [--dry-run] [--ignore-pin IGNORE_PIN]
                      [--overwrite-pin OVERWRITE_PIN]
                      files [files ...]

Automatically install all dependencies from one or more `requirements.yaml` or
`pyproject.toml` files. This command first installs dependencies with Conda,
then with Pip. Finally, it installs local packages (those containing the
`requirements.yaml` or `pyproject.toml` files) using `pip install [-e]
./project`. Example usage: `unidep install .` for a single project. For
multiple projects: `unidep install ./project1 ./project2`. The command accepts
both file paths and directories containing a `requirements.yaml` or
`pyproject.toml` file. Use `--editable` or `-e` to install the local packages
in editable mode. See `unidep install-all` to install all `requirements.yaml`
or `pyproject.toml` files in and below the current folder.

positional arguments:
  files                 The `requirements.yaml` or `pyproject.toml` file(s) to
                        parse or folder(s) that contain those file(s), by
                        default `.`

options:
  -h, --help            show this help message and exit
  -v, --verbose         Print verbose output
  -e, --editable        Install the project in editable mode
  --skip-local          Skip installing local dependencies
  --skip-pip            Skip installing pip dependencies from
                        `requirements.yaml` or `pyproject.toml`
  --skip-conda          Skip installing conda dependencies from
                        `requirements.yaml` or `pyproject.toml`
  --skip-dependency SKIP_DEPENDENCY
                        Skip installing a specific dependency that is in one
                        of the `requirements.yaml` or `pyproject.toml` files.
                        This option can be used multiple times, each time
                        specifying a different package to skip. For example,
                        use `--skip-dependency pandas` to skip installing
                        pandas.
  --no-dependencies     Skip installing dependencies from `requirements.yaml`
                        or `pyproject.toml` file(s) and only install local
                        package(s). Useful after installing a `conda-lock.yml`
                        file because then all dependencies have already been
                        installed.
  --conda-executable {conda,mamba,micromamba}
                        The conda executable to use
  --conda-env-name CONDA_ENV_NAME
                        Name of the conda environment, if not provided, the
                        currently active environment name is used, unless
                        `--conda-env-prefix` is provided
  --conda-env-prefix CONDA_ENV_PREFIX
                        Path to the conda environment, if not provided, the
                        currently active environment path is used, unless
                        `--conda-env-name` is provided
  --dry-run, --dry      Only print the commands that would be run
  --ignore-pin IGNORE_PIN
                        Ignore the version pin for a specific package, e.g.,
                        `--ignore-pin numpy`. This option can be repeated to
                        ignore multiple packages.
  --overwrite-pin OVERWRITE_PIN
                        Overwrite the version pin for a specific package,
                        e.g., `--overwrite-pin 'numpy==1.19.2'`. This option
                        can be repeated to overwrite the pins of multiple
                        packages.

`unidep install-all`

Use unidep install-all on a folder with packages that contain requirements.yaml files and install the dependencies on the current platform using conda, then install the remaining dependencies with pip, and finally install the current package with pip install [-e] ./package1 ./package2. See unidep install-all -h for more information:

usage: unidep install [-h] [-v] [-e] [--skip-local] [--skip-pip]
                      [--skip-conda] [--skip-dependency SKIP_DEPENDENCY]
                      [--no-dependencies]
                      [--conda-executable {conda,mamba,micromamba}]
                      [--conda-env-name CONDA_ENV_NAME | --conda-env-prefix CONDA_ENV_PREFIX]
                      [--dry-run] [--ignore-pin IGNORE_PIN]
                      [--overwrite-pin OVERWRITE_PIN]
                      files [files ...]

Automatically install all dependencies from one or more `requirements.yaml` or
`pyproject.toml` files. This command first installs dependencies with Conda,
then with Pip. Finally, it installs local packages (those containing the
`requirements.yaml` or `pyproject.toml` files) using `pip install [-e]
./project`. Example usage: `unidep install .` for a single project. For
multiple projects: `unidep install ./project1 ./project2`. The command accepts
both file paths and directories containing a `requirements.yaml` or
`pyproject.toml` file. Use `--editable` or `-e` to install the local packages
in editable mode. See `unidep install-all` to install all `requirements.yaml`
or `pyproject.toml` files in and below the current folder.

positional arguments:
  files                 The `requirements.yaml` or `pyproject.toml` file(s) to
                        parse or folder(s) that contain those file(s), by
                        default `.`

options:
  -h, --help            show this help message and exit
  -v, --verbose         Print verbose output
  -e, --editable        Install the project in editable mode
  --skip-local          Skip installing local dependencies
  --skip-pip            Skip installing pip dependencies from
                        `requirements.yaml` or `pyproject.toml`
  --skip-conda          Skip installing conda dependencies from
                        `requirements.yaml` or `pyproject.toml`
  --skip-dependency SKIP_DEPENDENCY
                        Skip installing a specific dependency that is in one
                        of the `requirements.yaml` or `pyproject.toml` files.
                        This option can be used multiple times, each time
                        specifying a different package to skip. For example,
                        use `--skip-dependency pandas` to skip installing
                        pandas.
  --no-dependencies     Skip installing dependencies from `requirements.yaml`
                        or `pyproject.toml` file(s) and only install local
                        package(s). Useful after installing a `conda-lock.yml`
                        file because then all dependencies have already been
                        installed.
  --conda-executable {conda,mamba,micromamba}
                        The conda executable to use
  --conda-env-name CONDA_ENV_NAME
                        Name of the conda environment, if not provided, the
                        currently active environment name is used, unless
                        `--conda-env-prefix` is provided
  --conda-env-prefix CONDA_ENV_PREFIX
                        Path to the conda environment, if not provided, the
                        currently active environment path is used, unless
                        `--conda-env-name` is provided
  --dry-run, --dry      Only print the commands that would be run
  --ignore-pin IGNORE_PIN
                        Ignore the version pin for a specific package, e.g.,
                        `--ignore-pin numpy`. This option can be repeated to
                        ignore multiple packages.
  --overwrite-pin OVERWRITE_PIN
                        Overwrite the version pin for a specific package,
                        e.g., `--overwrite-pin 'numpy==1.19.2'`. This option
                        can be repeated to overwrite the pins of multiple
                        packages.

`unidep conda-lock`

Use unidep conda-lock on one or multiple requirements.yaml files and output the conda-lock file. Optionally, when using a monorepo with multiple subpackages (with their own requirements.yaml files), generate a lock file for each subpackage. See unidep conda-lock -h for more information:

usage: unidep conda-lock [-h] [--only-global] [--lockfile LOCKFILE]
                         [--check-input-hash] [-d DIRECTORY] [--depth DEPTH]
                         [-f FILE] [-v]
                         [--platform {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}]
                         [--skip-dependency SKIP_DEPENDENCY]
                         [--ignore-pin IGNORE_PIN]
                         [--overwrite-pin OVERWRITE_PIN]
                         ...

Generate a global `conda-lock.yml` file for a collection of
`requirements.yaml` or `pyproject.toml` files. Additionally, create individual
`conda-lock.yml` files for each `requirements.yaml` or `pyproject.toml` file
consistent with the global lock file. Example usage: `unidep conda-lock
--directory ./projects` to generate conda-lock files for all
`requirements.yaml` or `pyproject.toml` files in the `./projects` directory.
Use `--only-global` to generate only the global lock file. The `--check-input-
hash` option can be used to avoid regenerating lock files if the input hasn't
changed.

positional arguments:
  extra_flags           Extra flags to pass to `conda-lock lock`. These flags
                        are passed directly and should be provided in the
                        format expected by `conda-lock lock`. For example,
                        `unidep conda-lock -- --micromamba`. Note that the
                        `--` is required to separate the flags for `unidep
                        conda-lock` from the flags for `conda-lock lock`.

options:
  -h, --help            show this help message and exit
  --only-global         Only generate the global lock file
  --lockfile LOCKFILE   Specify a path for the global lockfile (default:
                        `conda-lock.yml` in current directory). Path should be
                        relative, e.g., `--lockfile ./locks/example.conda-
                        lock.yml`.
  --check-input-hash    Check existing input hashes in lockfiles before
                        regenerating lock files. This flag is directly passed
                        to `conda-lock`.
  -d DIRECTORY, --directory DIRECTORY
                        Base directory to scan for `requirements.yaml` or
                        `pyproject.toml` file(s), by default `.`
  --depth DEPTH         Maximum depth to scan for `requirements.yaml` or
                        `pyproject.toml` files, by default 1
  -f FILE, --file FILE  A single `requirements.yaml` or `pyproject.toml` file
                        to use, or folder that contains that file. This is an
                        alternative to using `--directory` which searches for
                        all `requirements.yaml` or `pyproject.toml` files in
                        the directory and its subdirectories.
  -v, --verbose         Print verbose output
  --platform {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}, -p {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}
                        The platform(s) to get the requirements for. Multiple
                        platforms can be specified. By default, the current
                        platform (`linux-64`) is used.
  --skip-dependency SKIP_DEPENDENCY
                        Skip installing a specific dependency that is in one
                        of the `requirements.yaml` or `pyproject.toml` files.
                        This option can be used multiple times, each time
                        specifying a different package to skip. For example,
                        use `--skip-dependency pandas` to skip installing
                        pandas.
  --ignore-pin IGNORE_PIN
                        Ignore the version pin for a specific package, e.g.,
                        `--ignore-pin numpy`. This option can be repeated to
                        ignore multiple packages.
  --overwrite-pin OVERWRITE_PIN
                        Overwrite the version pin for a specific package,
                        e.g., `--overwrite-pin 'numpy==1.19.2'`. This option
                        can be repeated to overwrite the pins of multiple
                        packages.

`unidep pip-compile`

Use unidep pip-compile on one or multiple requirements.yaml files and output a fully locked requirements.txt file using pip-compile from pip-tools. See unidep pip-compile -h for more information:

usage: unidep pip-compile [-h] [-o OUTPUT_FILE] [-d DIRECTORY] [--depth DEPTH]
                          [-v]
                          [--platform {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}]
                          [--skip-dependency SKIP_DEPENDENCY]
                          [--ignore-pin IGNORE_PIN]
                          [--overwrite-pin OVERWRITE_PIN]
                          ...

Generate a fully pinned `requirements.txt` file from one or more
`requirements.yaml` or `pyproject.toml` files using `pip-compile` from `pip-
tools`. This command consolidates all pip dependencies defined in the
`requirements.yaml` or `pyproject.toml` files and compiles them into a single
`requirements.txt` file, taking into account the specific versions and
dependencies of each package. Example usage: `unidep pip-compile --directory
./projects` to generate a `requirements.txt` file for all `requirements.yaml`
or `pyproject.toml` files in the `./projects` directory. Use `--output-file
requirements.txt` to specify a different output file.

positional arguments:
  extra_flags           Extra flags to pass to `pip-compile`. These flags are
                        passed directly and should be provided in the format
                        expected by `pip-compile`. For example, `unidep pip-
                        compile -- --generate-hashes --allow-unsafe`. Note
                        that the `--` is required to separate the flags for
                        `unidep pip-compile` from the flags for `pip-compile`.

options:
  -h, --help            show this help message and exit
  -o OUTPUT_FILE, --output-file OUTPUT_FILE
                        Output file for the pip requirements, by default
                        `requirements.txt`
  -d DIRECTORY, --directory DIRECTORY
                        Base directory to scan for `requirements.yaml` or
                        `pyproject.toml` file(s), by default `.`
  --depth DEPTH         Maximum depth to scan for `requirements.yaml` or
                        `pyproject.toml` files, by default 1
  -v, --verbose         Print verbose output
  --platform {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}, -p {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}
                        The platform(s) to get the requirements for. Multiple
                        platforms can be specified. By default, the current
                        platform (`linux-64`) is used.
  --skip-dependency SKIP_DEPENDENCY
                        Skip installing a specific dependency that is in one
                        of the `requirements.yaml` or `pyproject.toml` files.
                        This option can be used multiple times, each time
                        specifying a different package to skip. For example,
                        use `--skip-dependency pandas` to skip installing
                        pandas.
  --ignore-pin IGNORE_PIN
                        Ignore the version pin for a specific package, e.g.,
                        `--ignore-pin numpy`. This option can be repeated to
                        ignore multiple packages.
  --overwrite-pin OVERWRITE_PIN
                        Overwrite the version pin for a specific package,
                        e.g., `--overwrite-pin 'numpy==1.19.2'`. This option
                        can be repeated to overwrite the pins of multiple
                        packages.

`unidep pip`

Use unidep pip on a requirements.yaml file and output the pip installable dependencies on the current platform (default). See unidep pip -h for more information:

usage: unidep pip [-h] [-f FILE] [-v]
                  [--platform {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}]
                  [--skip-dependency SKIP_DEPENDENCY]
                  [--ignore-pin IGNORE_PIN] [--overwrite-pin OVERWRITE_PIN]
                  [--separator SEPARATOR]

Get the pip requirements for the current platform only. Example usage: `unidep
pip --file folder1 --file folder2/requirements.yaml --separator ' ' --platform
linux-64` to extract all the pip dependencies specific to the linux-64
platform. Note that the `--file` argument can be used multiple times to
specify multiple `requirements.yaml` or `pyproject.toml` files and that --file
can also be a folder that contains a `requirements.yaml` or `pyproject.toml`
file.

options:
  -h, --help            show this help message and exit
  -f FILE, --file FILE  The `requirements.yaml` or `pyproject.toml` file to
                        parse, or folder that contains that file, by default
                        `.`
  -v, --verbose         Print verbose output
  --platform {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}, -p {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}
                        The platform(s) to get the requirements for. Multiple
                        platforms can be specified. By default, the current
                        platform (`linux-64`) is used.
  --skip-dependency SKIP_DEPENDENCY
                        Skip installing a specific dependency that is in one
                        of the `requirements.yaml` or `pyproject.toml` files.
                        This option can be used multiple times, each time
                        specifying a different package to skip. For example,
                        use `--skip-dependency pandas` to skip installing
                        pandas.
  --ignore-pin IGNORE_PIN
                        Ignore the version pin for a specific package, e.g.,
                        `--ignore-pin numpy`. This option can be repeated to
                        ignore multiple packages.
  --overwrite-pin OVERWRITE_PIN
                        Overwrite the version pin for a specific package,
                        e.g., `--overwrite-pin 'numpy==1.19.2'`. This option
                        can be repeated to overwrite the pins of multiple
                        packages.
  --separator SEPARATOR
                        The separator between the dependencies, by default ` `

`unidep conda`

Use unidep conda on a requirements.yaml file and output the conda installable dependencies on the current platform (default). See unidep conda -h for more information:

usage: unidep conda [-h] [-f FILE] [-v]
                    [--platform {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}]
                    [--skip-dependency SKIP_DEPENDENCY]
                    [--ignore-pin IGNORE_PIN] [--overwrite-pin OVERWRITE_PIN]
                    [--separator SEPARATOR]

Get the conda requirements for the current platform only. Example usage:
`unidep conda --file folder1 --file folder2/requirements.yaml --separator ' '
--platform linux-64` to extract all the conda dependencies specific to the
linux-64 platform. Note that the `--file` argument can be used multiple times
to specify multiple `requirements.yaml` or `pyproject.toml` files and that
--file can also be a folder that contains a `requirements.yaml` or
`pyproject.toml` file.

options:
  -h, --help            show this help message and exit
  -f FILE, --file FILE  The `requirements.yaml` or `pyproject.toml` file to
                        parse, or folder that contains that file, by default
                        `.`
  -v, --verbose         Print verbose output
  --platform {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}, -p {linux-64,linux-aarch64,linux-ppc64le,osx-64,osx-arm64,win-64}
                        The platform(s) to get the requirements for. Multiple
                        platforms can be specified. By default, the current
                        platform (`linux-64`) is used.
  --skip-dependency SKIP_DEPENDENCY
                        Skip installing a specific dependency that is in one
                        of the `requirements.yaml` or `pyproject.toml` files.
                        This option can be used multiple times, each time
                        specifying a different package to skip. For example,
                        use `--skip-dependency pandas` to skip installing
                        pandas.
  --ignore-pin IGNORE_PIN
                        Ignore the version pin for a specific package, e.g.,
                        `--ignore-pin numpy`. This option can be repeated to
                        ignore multiple packages.
  --overwrite-pin OVERWRITE_PIN
                        Overwrite the version pin for a specific package,
                        e.g., `--overwrite-pin 'numpy==1.19.2'`. This option
                        can be repeated to overwrite the pins of multiple
                        packages.
  --separator SEPARATOR
                        The separator between the dependencies, by default ` `

❓ FAQ

Here is a list of questions we have either been asked by users or potential pitfalls we hope to help users avoid:

Q: When to use UniDep?

A: UniDep is particularly useful for setting up full development environments that require both Python and non-Python dependencies (e.g., CUDA, compilers, etc.) with a single command.

In fields like research, data science, robotics, AI, and ML projects, it is common to work from a locally cloned Git repository.

Setting up a full development environment can be a pain, especially if you need to install non Python dependencies like compilers, low-level numerical libraries, or CUDA (luckily Conda has all of them). Typically, instructions are different for each OS and their corresponding package managers (apt, brew, yum, winget, etc.).

With UniDep, you can specify all your Pip and Conda dependencies in a single file. To get set up on a new machine, you just need to install Conda (we recommend micromamba) and run pip install unidep; unidep install-all -e in your project directory, to install all dependencies and local packages in editable mode in the current Conda environment.

For fully reproducible environments, you can run unidep conda-lock to generate a conda-lock.yml file. Then, run conda env create -f conda-lock.yml -n myenv to create a new Conda environment with all the third-party dependencies. Finally, run unidep install-all -e --no-dependencies to install all your local packages in editable mode.

For those who prefer not to use Conda, you can simply run pip install -e . on a project using UniDep. You'll need to install the non-Python dependencies yourself, but you'll have a list of them in the requirements.yaml file.

In summary, use UniDep if you:

Prefer installing packages with conda but still want your package to be pip installable.
Are tired of synchronizing your Pip requirements (requirements.txt) and Conda requirements (environment.yaml).
Want a low-effort, comprehensive development environment setup.

Q: Just show me a full example!

A: Check out the example folder.

Q: Uses of UniDep in the wild?

A: UniDep really shines when used in a monorepo with multiple dependent projects, however, since these are typically private, we cannot share them.

However, an example of a single package that is public is home-assistant-streamdeck-yaml. This is a Python package that allows to interact with Home Assistant from an Elgato Stream Deck connected via USB to e.g., a Raspberry Pi. It requires a couple of system dependencies (e.g., libusb and hidapi), which are typically installed with apt or brew. The README.md shows different installation instructions on Linux, MacOS, and Windows for non-Conda installs, however, with UniDep, we can just use unidep install . on all platforms. It is fully configured via pyproject.toml. The 2 Dockerfiles show 2 different ways of using UniDep:

Dockerfile.locked: Installing conda-lock.yml (generated with unidep conda-lock) and then pip install . the local package.
Dockerfile.latest: Using unidep install . to install all dependencies, first with conda, then pip, then the local package.

Q: How is this different from conda/mamba/pip?

A: UniDep uses pip and conda under the hood to install dependencies, but it is not a replacement for them. UniDep will print the commands it runs, so you can see exactly what it is doing.

Q: I found a project using unidep, now what?

A: You can install it like any other Python package using pip install. However, to take full advantage of UniDep's functionality, clone the repository and run unidep install-all -e in the project directory. This installs all dependencies in editable mode in the current Conda environment.

Q: How to handle local dependencies that do not use UniDep?

A: You can use the local_dependencies field in the requirements.yaml or pyproject.toml file to specify local dependencies. However, if a local dependency is not managed by UniDep, it will skip installing its dependencies!

To include all its dependencies, either convert the package to use UniDep (🏆), or maintain a separate requirements.yaml file, e.g., for a package called foo create, foo-requirements.yaml:

dependencies:
  # List the dependencies of foo here
  - numpy
  - scipy
  - matplotlib
  - bar
local_dependencies:
  - ./path/to/foo  # This is the path to the package

Then, in the requirements.yaml or pyproject.toml file of the package that uses foo, list foo-requirements.yaml as a local dependency:

local_dependencies:
  - ./path/to/foo-requirements.yaml

Q: Can't Conda already do this?

A: Not quite. Conda can indeed install both Conda and Pip dependencies via an environment.yaml file, however, it does not work the other way around. Pip cannot install the pip dependencies from an environment.yaml file. This means, that if you want your package to be installable with pip install -e . and support Conda, you need to maintain two separate files: environment.yaml and requirements.txt (or specify these dependencies in pyproject.toml or setup.py).

Q: What is the difference between `conda-lock` and `unidep conda-lock`?

A: conda-lock is a standalone tool that creates a conda-lock.yml file from a environment.yaml file. On the other hand, unidep conda-lock is a command within the UniDep tool that also generates a conda-lock.yml file (leveraging conda-lock), but it does so from one or more requirements.yaml or pyproject.toml files. When managing multiple dependent projects (e.g., in a monorepo), a unique feature of unidep conda-lock is its ability to create consistent individual conda-lock.yml files for each requirements.yaml or pyproject.toml file, ensuring consistency with a global conda-lock.yml file. This feature is not available in the standalone conda-lock tool.

Q: What is the difference between `hatch-conda` / `pdm-conda` and `unidep`?

A: hatch-conda is a plugin for hatch that integrates Conda environments into hatch. A key difference is that hatch-conda keeps Conda and Pip dependencies separate, choosing to install packages with either Conda or Pip. This results in Conda being a hard requirement, for example, if numba is specified for Conda, it cannot be installed with Pip despite its availability on PyPI.

In contrast, UniDep does not require Conda. Without Conda, it can still install any dependency that is available on PyPI (e.g., numba is both Conda and Pip installable). However, without Conda, UniDep will not install dependencies exclusive to Conda. These Conda-specific dependencies can often be installed through alternative package managers like apt, brew, yum, or by building them from source.

Another key difference is that hatch-conda is managing Hatch environments whereas unidep can install Pip dependencies in the current Python environment (venv, Conda, Hatch, etc.), however, to optimally use UniDep, we recommend using Conda environments to additionally install non-Python dependencies.

Similar to hatch-conda, unidep also integrates with Hatchling, but it works in a slightly different way.

A: pdm-conda is a plugin for pdm designed to facilitate the use of Conda environments in conjunction with pdm. Like hatch-conda, pdm-conda opts to install packages either with Conda or Pip. It is closely integrated with pdm, primarily enabling the inclusion of Conda packages in pdm's lock file (pdm.lock). However, pdm-conda lacks extensive cross-platform support. For instance, when adding a package like Numba using pdm-conda, it gets locked to the current platform (e.g., osx-arm64) without the flexibility to specify compatibility for other platforms such as linux64. In contrast, UniDep allows for cross-platform compatibility, enabling the user to specify dependencies for multiple platforms. UniDep currently does not support pdm, but it does support Hatchling and Setuptools.

UniDep stands out from both pdm-conda and hatch-conda with its additional functionalities, particularly beneficial for monorepos and projects spanning multiple operating systems. For instance:

Conda Lock Files: Create conda-lock.yml files for all packages with consistent sub-lock files per package.
CLI tools: Provides tools like unidep install-all -e which will install multiple local projects (e.g., in monorepo) and all its dependencies first with Conda, then remaining ones with Pip, and finally the local dependencies in editable mode with Pip.
Conda Environment Files: Can create standard Conda environment.yaml files by combining the dependencies from many requirements.yaml or pyproject.toml files.
Platform-Specific Dependencies: Allows specifying dependencies for certain platforms (e.g., linux64, osx-arm64), enhancing cross-platform compatibility.

🛠️ Troubleshooting

`pip install` fails with `FileNotFoundError`

When using a project that uses local_dependencies: [../not/current/dir] in the requirements.yaml file:

local_dependencies:
  # File in a different directory than the pyproject.toml file
  - ../common-requirements.yaml

You might get an error like this when using a pip version older than 22.0:

$ pip install /path/to/your/project/using/unidep
  ...
  File "/usr/lib/python3.8/pathlib.py", line 1222, in open
    return io.open(self, mode, buffering, encoding, errors, newline,
  File "/usr/lib/python3.8/pathlib.py", line 1078, in _opener
    return self._accessor.open(self, flags, mode)
FileNotFoundError: [Errno 2] No such file or directory: '/tmp/common-requirements.yaml'

The solution is to upgrade pip to version 22.0 or newer:

pip install --upgrade pip

⚠️ Limitations

Conda-Focused: Best suited for Conda environments. However, note that having conda is not a requirement to install packages that use UniDep.
Setuptools and Hatchling only: Currently only works with setuptools and Hatchling, not flit, poetry, or other build systems. Open an issue if you'd like to see support for other build systems.
No logic operators in platform selectors and no Python selectors.

Try unidep today for a streamlined approach to managing your Conda environment dependencies across multiple projects! 🎉👏

Name		Name	Last commit message	Last commit date
Latest commit History 545 Commits
.github		.github
docs		docs
example		example
tests		tests
unidep		unidep
.gitignore		.gitignore
.pre-commit-config.yaml		.pre-commit-config.yaml
.readthedocs.yaml		.readthedocs.yaml
LICENSE		LICENSE
README.md		README.md
pyproject.toml		pyproject.toml

License

basnijholt/unidep

Folders and files

Latest commit

History

Repository files navigation

🚀 UniDep - Unified Conda and Pip Dependency Management 🚀

📚 Table of Contents

📦 Installation

📝 requirements.yaml and pyproject.toml structure

Example

Example requirements.yaml

Example pyproject.toml

Key Points

Supported Version Pinnings

Conflict Resolution

How It Works

Platform Selectors

Supported Selectors

Usage

Implementation

🧩 Build System Integration

Example packages

Setuptools Integration

Hatchling Integration

🖥️ As a CLI

unidep merge

unidep install

unidep install-all

unidep conda-lock

unidep pip-compile

unidep pip

unidep conda